Automotive Equipment/Truck Wheel Alignment System/Truck Wheel Alignment

• Customization: Available
• After-sales Service: 24 Hours Online
• Warranty: 36 Months
• Model NO.: XP-A12
• Type: 3D Wheel Alignment
• Certification: CE, ISO
• Communication Mode: Infrared Wireless Communication
• Structure: Electronic
• Standard: Standard
• Condition: New
• Display Accuracy: 1′
• Camber: 2′
• Caster: 6′
• Kingpin Inclination: 6′
• Toe-in & Toe-out: 2′
• Set Back: 2′
• Thrust Angle: 2′
• Wheel Deviation: 2mm
• Axis Deviation: 2mm
• Transport Package: Container
• Specification: 1670*460*460mm
• Trademark: XPROMISE
• Origin: China
• HS Code: 9031809090
• Production Capacity: 5000pieces/Year
• Package Size: 430.00cm * 60.00cm * 75.00cm
• Package Gross Weight: 270.000kg

Product Description

Product Description

Truck Wheel Alignment/Automotive Equipment/Truck Wheel Alignment System

XP-A12


Characteristics of 3D Wheel Alignment:

1. 3D cameras alignment-Based on the car and not influenced by the platform

2. Measurement system-equipped with double digital cameras and four target disk, supplying  revolutionary measurement mode

3. Target disk-There is no electronic components and connection lines on the target disk, so the wheel alignment will not has a component failure problem.

4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration

5. Measurement progress-no need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth

6. Software system-Easy to operate, complete conventional basic parameters including two minutes ,significantly faster than conventional aligners

7. Daily Maintenance-Easily maintenance and download freely upgrade for the model data


Software function:

Basic function: camber,  caster, Kingpin Inclination, toe angle, set back, Thrust Angle and so on

Extended function: axis deviation, wheel deviation, monowheel, auto lift measurement function, steering wheel square, locating platform levelness detection.
 

Accessories

Product Measurement Principle

The machine vision system can automatically recognize the position of the targetdisc and target probe installed on the wheel under test, so as to calculate its geometricposition in space with a high degree of accuracy

Product Parameters

Measurement project	Accuracy	Measurement range
Display accuracy	1′/1mm
Camber	±2′	±10°
Caster	±6′	±20°
Kingpin inclination	±6′	±20°
Toe-in & Toe-out	±2′	±20°
Set back	±2′	±5°
Thrust angle	±2′	±5°
Wheel deviation	±2mm	4000mm
Axis deviation	±2mm	4000mm

Product Advantages

 

Visual positioning
Industrial camera
3D modeling

Wifi communication
Low power consumption
High speed
Stable signal

Rim compensation
Adjustment-free
Automatic compensation

Measurement mode
Whole vehicle positioning
Measurement benchmark
 

Product Features

1. Higher accuracy and more powerful functions. Its accuracy can be accurate to 0.1mm/0.01° its function can not only realize all the traditional parameters, but also can measure the frame parameters, and easily realize many functions that CCD and laser locator cannot complete

2. The operation is more convenient. The measurement is not affected by the level of the platform; it only needs to push the car or the supporting wheel mode to complete the measurement of all parameters; it can be moved and used at will

3. The failure rate is extremely low. The target board has no electronic components, no battery no data transmission, and only serves as a reflection of the image; the main frame is a metal frame, and the column is a cast body, which is resistant to corrosion and pressure; the computer is mostly brand high-end configuration, To adapt to large data processing, the performance is more stable

4. Dual mode measurement: you can select drive axle measurement or drive axle measurement mode

HD industrial camera (8 million)

The camera shooting software processes the images received from the camera and recognizes the target from the frame images. After that, the machine vision subsystem will calculate the three-dimensional coordinates of each space target. These three-dimensional coordinates will be used to calculate the positioning value of each wheel. Effective range: 10m


Target plate(Laser engraving)

It is composed of several circular patterns of different fixed sizes Use the camera to shoot to establish a three-dimensional image of the target; since the size of the target is fixed, it provides an accurate basis for software calculations


Clamp

Adapter device to quickly find the center of the steel ring; Card loading range: 16-24 inches


Turntable

The supporting device removes the friction between the tire and the ground during the rotation.
Bearing capacity: 10 tons

Factory Tour

 

 

Trade Info

 

Trade Terms	FOB / CFR
MOQ	3UNITS  (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee)
Port	QINGDAO
Shipment	BY SEA /AIR
Payment Terms	T/T
Payment condition	30% prepayment,balanced againt BL copy&L/C at sight.
Supply Capability	1000units/month
Sample Availability	Yes ,But all freight(Inland freight +seafreight) covered by buyer
Sample Time	5-10days(depends on whether have in stock)
Lead Time	25-30days(Rush season 5-10days longer)
Packing	Metal frame&Carton
Delivery time	30-45days shipping time (depends on destination position)
Service	1% free parts;1year warranty after port of destination

1. Why should I choose our product?

There are several reasons you should strongly consider purchasing our product:

*Top raw materials from only the finest plants

*Only professional cost-effective equipment 

*Low prices with high quality revenue producing products

*Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)

*The best customer service. Quick reply within 24 hours and more.

*Great Warranty


2. How safe are your product?

Our product  have been tested and CE certified for safety. They also meet the American and Australian Standard.


3. Should I keep repair and replacement parts in stock?

Yes, most all commonly required repair and replacement parts should always keep in stock.


4. Are your product designed for commercial use?

All of our product can be used in commercial applications without any problems.


5. Do you offer any custom designs?

Yes,we provide OEM/ODM services to top range partners. Produce a superior product for you by your designs.