| After-sales Service: | 24 Hours Online |
|---|---|
| Warranty: | 24 Months |
| Type: | 3D Wheel Alignment |
| Samples: |
The standard configuration
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Characteristics of 3D Wheel Alignment
1. 3D cameras alignment-Based on the car and not influenced by the platform
2. Measurement system-equipped with double digital cameras and four target disk, supplying revolutionary measurement mode
3. Target disk-There is no electronic components and connection lines on the target disk, so the wheel alignment will not has a component failure problem.
4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration.
5. Measurement progress-no need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
6. Software system--Easy to operate, complete conventional basic parameters including two minutes ,significantly faster than conventional aligners
7. Daily Maintenance-Easily maintenance and download freely upgrade for the model data
| Configuration list |
| Cabinet*1 |
| Column*1 |
| Target plate*4 |
| 11"-25" clamp*4 |
| Dell host*1 |
| Turntable plate*2 |
| Beam*1 |
| Wedge block*2 |
| Transition block of turntable*2 |
| Break fixer*1 |
| Safety cable*4 |
| Dell keyboard and mouse*1 |
| Steering sixer*1 |
| LCD display*1 |
Software function
Basic function: camber, caster, Kingpin Inclination, toe angle, set back, Thrust Angle and so on.
Extended function: axis deviation, wheel deviation, mono wheel, auto lift measurement function, steering wheel square, locating platform levelness detection.
| Measurement project | Accuracy | Measurement range |
| Display accuracy | 1´/1mm | |
| Camber | ±2´ | ±10° |
| Caster | ±6´ | ±20° |
| Kingpin Inclination | ±6´ | ±20° |
| Toe-in & Toe-out | ±2´ | ±20° |
| Set back | ±2´ | ±5° |
| Thrust angle | ±2´ | ±5° |
| Wheel Deviation | ±2mm | 4000mm |
| Axis Deviation | ±2mm | 4000mm |
3D measurement technology
Based on the car body measurement technology more accurate, more stable.
Camera measurement system
Two cameras combined with four target disks creating a revolutionary measurement method.
Software system
Easy to operate, basic four-wheel positioning data can be read in two minutes.
Measurement process
The body as a benchmark not affected by the level of the lifting platform
Equipment calibration
Only one RCP calibration is required after the equipment is installed, the process is simple and there is no need to repeat this work regularly
3D imaging measurement technology
No delay.instant completion-3D imaging dynamic measurement technology allows the operator to dynamically adjust the parameters of the four-wheel positioning.
3D animation adjustment guide
Provide instructions on specific methods of vehicle adjustment.including notes on parts and tools required for adjustment
The customer guide
Menu options have functional instructions clear identification and color prompts to avoid user misoperations.
Kingpin back Angle kingpin inside Angle diagnosis
All the parameters reflect the real state of the suspension system in real time.helping the operator to better judge the condition of the vehicle and adjust the four-wheel positioning
No rims compensation no lifting of the body
The V3D1 3d imaging technology is different from the traditional CCD four-wheel positioning technology without a horizontal test reference plane can be quickly and accurately four-wheel positioning.
Yantai Lift Equipment Co., Ltd. is a group enterprise integrating scientific research, business, production and service.
Our company specializing in the production and sales of wheel alignment, car lift, tire changer, wheel balancer and other garage equipment.
All of our products adopt international quality standards and are greatly appreciated in a variety of different markets throughout the world. The company always adheres to independent research and development and independent production. Advanced intelligent equipment and scientific management mode provide its excellent quality assure.
We have over 120 employees, an annual sales figure that exceeds USD20000000 and are currently exporting 90% of our production worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Australia, Thailand, Malaysia, Indonesia, France, Spain, Turkey, Jordan, Mexico and other countries.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Our products: The perfect combination of high quality and high cost performance.
Our mission: High-quality products serve the automotive aftermarket in China and the world.
We are becoming a modern and competitive company, a leader in the field of automotive service equipment.
|
Trade Terms |
FOB / CFR |
|
MOQ |
3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
|
Port |
QINGDAO |
|
Shipment |
BY SEA /AIR |
|
Payment Terms |
T/T |
|
Payment condition |
30% prepayment,balanced againt BL copy&L/C at sight. |
|
Supply Capability |
1000units/month |
|
Sample Availability |
Yes ,But all freight(Inland freight +seafreight) covered by buyer |
|
Sample Time |
5-10days(depends on whether have in stock) |
|
Lead Time |
25-30days(Rush season 5-10days longer) |
|
Packing |
Metal frame&Carton |
|
Delivery time |
30-45days shipping time (depends on destination position) |
|
Service |
1% free parts;1year warranty after port of destination |
1. Why should I choose our 3D wheel Alignment?
There are several reasons you should strongly consider purchasing our 3D wheel Alignment:
*Top raw materials from only the finest plants
*Only professional cost-effective equipment
*Low prices with high quality revenue producing products
*Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
*The best customer service. Quick reply within 24 hours and more.
*Great Warranty
2. How safe are our 3D wheel Alignment?
Our 3D wheel Alignment have been tested and CE certified for safety . They also meet the American and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. Are our 3D wheel Alignment designed for commercial use?
All of our 3D wheel Alignment can be used in commercial applications without any problems.
5. Do you offer any custom designs?
Yes,we provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}