Auto Spray Booth for Sale/Garage Equipment Powder Coating Booth/Original Factory Produce

Product Description

Product Description

Auto Spray Booth for Sale/Garage Equipment Powder Coating Booth/Original Factory Produce

Model: HE-607

Product Parameters

Outside size (m)	7*5.4*3.42m(L*W*H)
Inside size (m)	6.9*3.9*2.7m(L*W*H)
Wall panel	Color	Optional: gray, white, blue, red
	Material	Rock wool density: 120kg. Thickness: 50mm
	Color steel plate	Thickness: 0.426mm
	Structure	Strengthen structure, reduce deformation improve wind. pressure resistance double-sided film
	One side	Use 8mm tempered glass, with heat insulation and explosion-proof film on one side, .360°viewable
Door	Size	3000(W)*2600(H)
	Structure	Use 0.8mm zinc plate, steel frame welding to ensure strength; door hinge uses 6mm steel plate to ensure no deformation or sagging, 5mm square tempered glass observation window is set
	Color	Optional: gray, white, blue, red
Safety door + small steps	1800*600 (mm ), 1 aluminum alloy door
Lighting system	LED	(2) side x (4) group x (4) branch, (18) W/ branch Using LED. it works normally when the power is as low as 180 volts.
Air supply system	Control cabinet	40*40 square tube welding, 0.8 galvanized sheet overall painting
	Inlet motor	YDW type centrifugal fan, 4 kilowatts, with M type air inlet
	Air volume	Air volume 24000 (m³/hour), wind speed 0.25-0.35 (m/s) air change frequency 280 times/h
	Wind tube	4 straight pipes (700*700*1000) and 1 elbow pipe (700*700*R200)
Heating system	Short-wave infrared radiator	3*51.5cm*10 groups (30kw) double-door short-wave infrared heaters. The power cord adopts a high temperature resistant cable with a diameter of 1.5 square meters
Ground assembly	Made of galvanized steel	Made of 1.2mm galvanized sheet and 40*80*1.8 square steel bracket. All grill bottom with fiberglass wool
	Approach bridge	Anti-skid checker plate
Netting	Top cotton	6 groups/set of support mesh installation, cotton rack 30*30 square tubes, filtration efficiency ≥96%
	Structure	Disassembly method: cotton screw + pressed disc method
Top beam	Well-shaped connection bracket	40*60*1.5 square tube
Top plate	Galvanized sheet assembly, thickness of steel plate: 0.8mm
Filtering system	Primary filter cotton, sub-high efficiency filter cotton
Electronic Control System (Mechanical Control)	The box is made of 1.5mm galvanized sheet, the surface is sprayed and there are total control switches, fan switches, lighting switches heating switches, and single-group baking light switches, all of which are independently controlled.
Installed total power	39.5KW (three-phase four-wire) 380V/50HZ

Yantai Lift Equipment Co., Ltd. is a joint-stock enterprise specializing in the production and sales of wheel alignment, car lift, tire changer, wheel balancer and other garage equipment.

The company has four major production bases: Wheel alignment, car lift, tire changer and wheel balancer. The company always adheres to independent research and development and independent production. Advanced intelligent equipment and scientific management mode provide its excellent quality assure.

Wheel alignments include car wheel alignments, truck wheel alignments, and car lifts include scissor car lifts, single-post car lifts, two-post car lifts, four-post car lifts, and motorcycle lifts.


Our products have been exported to Australia, Thailand, Malaysia, Indonesia, France, Spain, Turkey, Jordan, Mexico and other countries.

Our products: The perfect combination of high quality and high cost performance.

Our mission: High-quality products serve the automotive aftermarket in China and the world.

We are becoming a modern and competitive company, a leader in the field of automotive service equipment.

Trade Info

Trade Terms	FOB / CFR
MOQ	3UNITS  (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee)
Port	QINGDAO
Shipment	BY SEA
Payment Terms	T/T
Payment condition	30% prepayment,balanced againt BL copy&L/C at sight.
Supply Capability	1000units/month
Sample Availability	Yes ,But all freight(Inland freight +seafreight) covered by buyer
Sample Time	5-10days(depends on whether have in stock)
Lead Time	25-30days(Rush season 5-10days longer)
Packing	Metal frame&Carton
Delivery time	30-45days shipping time (depends on destination position)
Service	1% free parts;1year warranty after port of destination

FAQ

1. Why should I choose our spray booth?

There are several reasons you should strongly consider purchasing our  tire changer:

*Top raw materials from only the finest plants

*Only professional cost-effective equipment 

*Low prices with high quality revenue producing products

*Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)

*The best customer service. Quick reply within 24 hours and more.

*Great Warranty


2. How safe are our spray booth?

Ourtire changer have been tested and CE certified for safety. They also meet the American and Australian Standard.


3. Should I keep repair and replacement parts in stock?

Yes, most all commonly required repair and replacement parts should always keep in stock.


4. Are tire changer designed for commercial use?

All of our tire changer can be used in commercial applications without any problems.


5. Do you offer any custom designs?

Yes,we provide OEM/ODM services to top range partners. Produce a superior product for you by your designs.